korg msk2xr editor register with key

Korg MS2KxR Chapter 2 – Getting Started

User Manuals Knowledge Level

Everything you need to know about our product install, setup steps, configuration and usage of various features

PREPARE YOUR SYNTHESIZER FOR THE EDITOR

First, we need to make sure the hardware is ready to communicate with the software.

Connect the MIDI cables to the MIDI interface and Audio Jacks to your console / sound card. MIDI out from synth to MIDI interface IN and vice versa. No MIDI thru configurations does not work.

 

  • MIDI Out from MIDI interface to MS2000 / MS2000R MIDI In port.
  • MIDI Out from MS2000 / MS2000R to MIDI interface MIDI In port.
    • double check your cables!
  • Audio from MS2000 / MS2000R Main Out L&R to console or sound card inputs.

Wiring diagram example

wiring schematics ms2kxr editor

Korg MS2KxR Wiring Schematics

Power up your MS2000 / MS2000R. Our editor is designed to work “out of the box” and control all parameters from single application instance.

Configure MS2000(R)(B)

Enter Global settings with “GLOBAL” button below the display. Use “CURSOR” and “PAGE” buttons to navigate around the settings.

korg ms2000 navigation buttons

Korg MS2000 Navigation Buttons

G2A MEMORY (protect) = OFF
G3A MIDI (midi channel) = 1
G3B MIDI (local) = on or off
G3C MIDI (clock) = Internal *
G4A MIDI FILTER (prog change) = ENA
G4B MIDI FILTER (ctrl change) = ENA
G4C MIDI FILTER (p.bend) = ENA
G4D MIDI FILTER (system ex) = ENA
G4E MIDI FILTER (note receive) = ALL

External Clock Note: Arpeggiator will not play unless DAW is unable to provide MIDI Clock. Windows: Check our method of using MIDI OX and LoopBe together to provide MIDI clock from DAW to your synth.

PREPARE YOUR DAW FOR THE PLUG-IN

Check the configuration guide for your system below. Start from the “Setting MIDI Devices” guide and then check your DAW guide.

 

Config Guide Date Online
Setting MIDI Devices 12-Jan-2021 View
Ableton Live 08-Mar-2021 View
Apple Logic Pro 08-Mar-2021 View
AVID ProTools with Blue Cat's PatchWork 16-Mar-2021 View
Bitwig Studio 14-Mar-2021 View
Cockos Reaper 14-Mar-2021 View
Image-Line Fruity Loops Studio 10-Mar-2021 View
MOTU Digital Performer 12-Mar-2021 View
PreSonus Studio One 10-Mar-2021 View
Reason Studios Reason 12-Mar-2021 View
Renoise 17-Mar-2021 View
Steinberg Cubase Pro 11-Mar-2021 View
Universal Audio LUNA N/A View

Insert the plug-in into your project

First Run / Plug-in Scan

After reading the configuration guide for Setting MIDI Devices and configuration guide for your DAW, we can safely open the plug-in in our DAW and start the plug-in scanning process.

If the plug-in scan fails, please open the Editor LOG file and check if it ends to reading a patch file like this:

PATCH LIBRARIAN: loaded file C:\Users\yourUserName\Music\Mystery Islands Music\[PLUGIN NAME]\Patches\Soundset X.mid

If that is the case, move the Soundset X.mid to another location and try to scan the plug-in again. If it fails again, redo the process until the scan is successful. There might be several soundsets which are not compatible with the plug-in for some reason – If you would like us to figure the issue out, open the chat form and reach us.

REGISTER PLUG-IN WITH LICENSE

First of all, we couldn’t be happier that you have decided to support our long journey of coding this product, constantly improving it and drawing the graphics ourselves! THANK YOU.

Registered owners can enjoy the full advantages of the plug-in, like:

  • Plug-in parameters can be automated directly from your DAW.
  • Librarian is fully functional and allows full editing possibilities.
  • Total Recall: Once you open your project after your last session, all the data used in your previous session will be automatically sent to your synthesizer.
  • Get tech support and updates with lifetime license or while subscription is active!

If you purchased plug-in / application license from our store, download the license and the full installer from
https://auraplugins.com/downloads/korg-ms2000-editor/ after you login.

Unzip the full installer and run it from your computer. If installer fails, try again as follows:
Right click the installer and choose “open”. You can safely ignore all warnings.

Manually placing the license.key

If you have plug-in inserted to your project, now it is time to delete the track / plug-in instance from your DAW.

Move the license.key manually to plug-in data folder (see location mentioned on page 9). Before you continue, check and make sure the license is called license.key ! If all is good, you can now re-insert your plug-in to your DAW. Image below from macOS.

korg msk2xr editor register manually

MS2KxR User Manual – License Location

Register plug-in from User Interface

Once you’ve installed the FULL version and you have your plug-in user interface opened, enter Librarian [1], click Bank Edit [2] and choose Register Plug-in [3] from the menu once you open the plug-in in your DAW for the first time.

korg msk2xr editor register with key

MS2KxR Editor User Manual – Register Plug-in

A file dialog will popup and you must navigate to the downloads folder and select the license.key from there.

After you have chosen the license.key, remove the plug-in instance from your DAW and insert it again. Plug-in display should now indicate “REGISTERED” in the top left corner.

IF the plug-in shows “** DEMO VERSION **” you haven’t installed the FULL version yet or you might have the plug-in installed in several locations! Check solution from Troubleshooting section.

FILTER INCOMING MIDI DATA FROM PHYSICAL PORT

In order to prevent duplicate MIDI data flow passing to our plug-in, take a good look at your DAW user guide how to filter or block MIDI messages from the hardware.

Here is an example: I am using MS2000R and our MS2KxR Editor plug-in in my project. If I move a Filter Cutoff knob from the synthesizer, it will send MIDI message out to physical MIDI device. Now, from there, your DAW will process this message and pass it into your record / monitor enabled track if it is not blocked / filtered. We don’t need this data to pass thru twice since we are going to open the physical ports in the plug-in user interface. I hope that made sense.

If in the other hand, you are using MS2000, you might want to pass the note data thru to your DAW in order to play other virtual instruments.

In such a scenario, allow only note data to pass through from the input port.

Click on GLOBAL SETTINGS [1] and then click ADVANCED MIDI SETTINGS [2] button from there.

korg msk2xr editor adv midi guide

MS2KxR User Manual – Enter Global Settings to access Advanced MIDI Settings

Now that the window is open, filter out note processing [1] from the hardware port.

korg msk2xr editor filter incoming notes

MS2KxR User Manual – Filter Hardware Notes

DISABLE PHYSICAL MIDI PORTS FROM YOUR DAW

One of the most important things, especially on Windows platform is that you disable your physical MIDI ports which are used to connect your synthesizer from your DAW. And make sure that the ports are not used within your DAW at all!

If the port is used inside your DAW and you try to assign MIDI input / MIDI output in the plug-in, it might crash hard and you could potentially lose your work!

Chapter 2 of 6

0
0
776
Rate this user guide

 

Spread the word in socials and support us via Ko-fi! ☕️

WordPress Cookie Notice by Real Cookie Banner
0 Shares
Tweet
Share
Reddit
Share
Pin
More