Everything you need to know about our product install, setup steps, configuration and usage of various features
PREPARE YOUR SYNTHESIZER FOR THE EDITOR
First, we need to make sure the hardware is ready to communicate with the software.
Connect the MIDI cables to the MIDI interface and Audio Jacks to your console / sound card. MIDI out from synth to MIDI interface IN and vice versa. No MIDI thru configurations does not work. You can use USB connection as well.
- MIDI Out from MIDI interface to Pulse 2 MIDI In port.
- MIDI Out from Pulse 2 to MIDI interface MIDI In port.
- double check your cables!
- Audio from Pulse 2 Main Out L&R to console or sound card inputs.
Wiring diagram example
Power up your Pulse 2. Our editor is designed to work “out of the box” and control all parameters from single plug-in instance.
Configure Pulse 2
Enter Global settings and apply following settings.
Click and hold SHIFT + Global and apply the settings below:
PREPARE YOUR DAW FOR THE PLUG-IN
Check configuration guide for your system from the plug-in / standalone application below. Start from the “Setting MIDI Devices” guide and then check your DAW guide.
Guides can be found from the data folder. See above for data locations on our HDD.
|Setting MIDI Devices||12-Jan-2021||View||Download|
|Apple Logic Pro||08-Mar-2021||View||Download|
|AVID ProTools with Blue Cat's PatchWork||16-Mar-2021||View||Download|
|Image-Line Fruity Loops Studio||10-Mar-2021||View||Download|
|MOTU Digital Performer||12-Mar-2021||View||Download|
|PreSonus Studio One||10-Mar-2021||View||Download|
|Reason Studios Reason||12-Mar-2021||View||Download|
|Steinberg Cubase Pro||11-Mar-2021||View||Download|
|Universal Audio LUNA||N/A||View||Download|
Insert the plug-in into your project
First Run / Plug-in Scan
After reading the configuration guide for Setting MIDI Devices and configuration guide for your DAW, we can safely open the plug-in in our DAW and start the plug-in scanning process.
If the plug-in scan fails, please open the Editor LOG file and check if it ends to reading a patch file like this:
PATCH LIBRARIAN: loaded file C:\Users\yourUserName\Music\Mystery Islands Music\[PLUGIN NAME]\Patches\Soundset X.mid
If that is the case, move the Soundset X.mid to another location and try to scan the plug-in again. If it fails again, redo the process until the scan is successful. There might be several soundsets which are not compatible with the plug-in for some reason – If you would like us to figure the issue out, open the chat form and reach us.
REGISTER PLUG-IN WITH LICENSE
First of all, we couldn’t be happier that you have decided to support our long journey of coding this product, constantly improving it and drawing the graphics ourselves! THANK YOU.
Registered owners can enjoy the full advantages of the plug-in, like:
- Plug-in parameters can be automated directly from your DAW.
- Librarian is fully functional and allows full editing possibilities.
- Total Recall: Once you open your project after your last session, all the data used in your previous session will be automatically sent to your synthesizer.
- Get tech support and updates with lifetime license or while subscription is active!
If you purchased plug-in license from our store, download the license and the full installer from
https://auraplugins.com/downloads/waldorf-pulse-2-editor/ after you login.
Unzip the full installer and run it from your computer. If installer fails, try again as follows:
Right click the installer and choose “open”. You can safely ignore all warnings.
Manually placing the license.key
If you have plug-in inserted to your project, now it is time to delete the track / plug-in instance from your DAW.
Move the license.key manually to plug-in data folder (see location mentioned on page 9). Before you continue, check and make sure the license is called license.key ! If all is good, you can now re-insert your plug-in to your DAW. Image below from macOS.
Register plug-in from User Interface
Once you’ve installed the FULL version and you have your plug-in user interface opened, enter Patch Librarian , click Bank Edit  and choose Register Plug-in  from the menu once you open the plug-in in your DAW for the first time.
A file dialog will popup and you must navigate to the downloads folder and select the license.key from there.
After you have chosen the license.key, remove the plug-in instance from your DAW and insert it again. Plug-in upper left corner should now indicate “REGISTERED”.
IF the plug-in shows “** DEMO VERSION **” you haven’t installed the FULL version yet or you might have the plug-in installed in several locations! Check solution from Troubleshooting section.
FILTER INCOMING MIDI DATA FROM PHYSICAL PORT
In order to prevent duplicate MIDI data flow passing to our plug-in, take a good look at your DAW user guide how to filter or block MIDI messages from the hardware.
Here is an example: I am using Pulse 2 and our Pulse2X Editor plug-in in my project. If I move a Filter Cutoff knob from the synthesizer, it will send MIDI message out to physical MIDI device. Now, from there, your DAW will process this message and pass it into your record / monitor enabled track if it is not blocked / filtered. We don’t need this data to pass thru twice since we are going to open the physical ports in the plug-in user interface. I hope that made sense.
DISABLE PHYSICAL MIDI PORTS FROM YOUR DAW
One of the most important things, especially on Windows platform is that you disable your physical MIDI ports which are used to connect your synthesizer from your DAW. And make sure that the ports are not used within your DAW at all!
If the port is used inside your DAW and you try to assign MIDI input / MIDI output in the plug-in, it might crash hard and you could potentially lose your work!