wiring schematics snx editor

Configure Novation Nova / Supernova

Configuration Knowledge Level

Configuration articles and guides for software and hardware. These settings are mandatory unless otherwise stated

PREPARE YOUR SYNTHESIZER FOR THE EDITOR

First, we need to Configure Novation Nova / Supernova so that it is ready to communicate with the software.

Connect the MIDI cables to the MIDI interface and Audio Jacks to your console / sound card. MIDI out from synth to MIDI interface IN and vice versa. No MIDI thru configurations does not work.

 

  • MIDI Out from MIDI interface to Nova/Supernova MIDI In port.
  • MIDI Out from Nova/Supernova to MIDI interface MIDI In port.
    • double check your cables!
  • Audio from Nova/Supernova Outputs to console or sound card inputs.

Wiring diagram example

wiring schematics snx editor

Novation SNX Wiring Schematics

Power up your Nova/Supernova and put it into PERFORMANCE mode. Our editor is designed to work “out of the box” and control all parameters from single plug-in instance.

Configure Nova

Enter Performance mode, open Global settings and scroll to first page with “Page down” button.

Global MIDI chan = 16
SysEx Reception = Normal
MIDI clock = INT (*)
Local Control = On
Memory Protect = Off
Incoming control change = Enabled
Incoming program change = Enabled
Prog change Tx = On
Controllers Tx = On
Click write to overwrite the global settings so they are memorized. Click global again after prompting write to return in Performance mode.

External Clock Note: Arpeggiator will not play unless DAW is unable to provide MIDI Clock. Windows: Check our method of using MIDI OX and LoopBe together to provide MIDI clock from DAW to your synth.

2
0
1126
Rate this article

 

Spread the word in socials and support us via Ko-fi! ☕️

WordPress Cookie Notice by Real Cookie Banner
0 Shares
Tweet
Share
Reddit
Share
Pin
More