wiring schematics ms2kxr editor

Configure Korg MS2000(B)(R)

Configuration Knowledge Level

Configuration articles and guides for software and hardware. These settings are mandatory unless otherwise stated

PREPARE YOUR SYNTHESIZER FOR THE EDITOR

First, we need to Configure Korg MS2000(B)(R) so that it is ready to communicate with the software.

Connect the MIDI cables to the MIDI interface and Audio Jacks to your console / sound card. MIDI out from synth to MIDI interface IN and vice versa. No MIDI thru configurations does not work.

 

  • MIDI Out from MIDI interface to MS2000 / MS2000R MIDI In port.
  • MIDI Out from MS2000 / MS2000R to MIDI interface MIDI In port.
    • double check your cables!
  • Audio from MS2000 / MS2000R Main Out L&R to console or sound card inputs.

Wiring diagram example

wiring schematics ms2kxr editor

Korg MS2KxR Wiring Schematics

Power up your MS2000 / MS2000R. Our editor is designed to work “out of the box” and control all parameters from single application instance.

Configure MS2000(R)(B)

Enter Global settings with “GLOBAL” button below the display. Use “CURSOR” and “PAGE” buttons to navigate around the settings.

korg ms2000 navigation buttons

Korg MS2000 Navigation Buttons

G2A MEMORY (protect) = OFF
G3A MIDI (midi channel) = 1
G3B MIDI (local) = on or off
G3C MIDI (clock) = Internal *
G4A MIDI FILTER (prog change) = ENA
G4B MIDI FILTER (ctrl change) = ENA
G4C MIDI FILTER (p.bend) = ENA
G4D MIDI FILTER (system ex) = ENA
G4E MIDI FILTER (note receive) = ALL
External Clock Note: Arpeggiator will not play unless DAW is unable to provide MIDI Clock. Windows: Check our method of using MIDI OX and LoopBe together to provide MIDI clock from DAW to your synth.
0
0
116
Rate this article

 

Spread the word in socials and support us via Ko-fi! ☕️

Cookie Consent with Real Cookie Banner
0 Shares
Tweet
Share
Reddit
Share
Pin
More